WP-50A Electric Pipe Threading Machine (1/2"~2"BSPT/NPT)






The WP-50A cuts, reams, and threads 1/2″–2″ pipe on one machine. It supports BSPT or NPT threading, depending on the die configuration, and features automatic lubrication with adjustable oil flow. A manual die head, two sets of alloy dies, a pipe reamer, and a pipe cutter are included.
Detail Information
WP-50A Electric Pipe Threading Machine
Cut, Ream, and Thread 1/2″–2″ Pipe on One Machine
Key Features
· Available with self-opening, REX-type and RIDGID-type quick-opening die heads for various applications
· The high-strength die-cast aluminum alloy casing is lightweight and durable. Front and rear guide pillars are made of solid round steel, with reinforced support lugs
· Available with a 900W, 1100W, or 1300W motor, the machine provides strong power for full-length threading in one operation
· The automatic lubrication system with adjustable oil flow continuously lubricates the dies and workpiece through the die head, helping extend die life and improve thread quality
Technical Specifications
| Model: | WP-50A |
| Fabrication Capacity: | 1/2"~2"BSPT/NPT |
| No load Speed: | 28RPM |
Motor Power Options: | 900 W / 1,100 W / 1,300 W |
Power Supply: | 110 V or 220 V, single-phase |
Frequency: | 50/60 Hz |
| Gross Weight: | 83kgs |
| Packing Size: | 70*45*55cm |
Standard
| Catalog No. | Description | |
| S620210 | Manual die head ½"-2" | |
| S620211 | Alloy dies ½"-¾", 27*10mm | |
| S620212 | Alloy dies 1"-2", 27*10mm | |
S620215 | Pipe Reamer 1/2"-2" | |
S620216 | Pipe Cutter 1/2“-2” | |
Optional
| Catalog No. | Description | |
| S620213 | HSS dies ½"-¾”, 27*10mm | |
| S620214 | HSS dies 1"-2", 27*10mm | |
| S620217 | Foot Peddle | |
S620222 | Manual Dies Head, Compatible with 811A | |
S620218 | Alloy dies ½"-¾”, compatible with ridgid | |
S620219 | Alloy dies 1"-2", compatible with ridgid | |
S620220 | HSS dies ½"-¾”, compatible with ridgid | |
S620221 | HSS dies 1"-2", compatible with ridgid | |
WP-100A Product Highlights
Manual Die Head and Two Alloy Die Sets
A manual die head and two alloy die sets come standard, covering 1/2″–3/4″ and 1″–2″. BSPT or NPT dies can be supplied to suit the required thread standard.
Automatic Lubrication with Adjustable Oil Flow
Oil flows through the die head to continuously lubricate the dies and pipe end during threading. The flow rate is adjustable to help reduce die wear and maintain thread quality.
Built-In Pipe Cutter and Reamer
Cut pipe to length, remove internal burrs, and thread the pipe end on the same machine. Both the cutter and reamer handle 1/2″–2″ pipe.
Die-Cast Aluminum Housing and Solid Steel Guides
The die-cast aluminum alloy housing is lightweight and durable. Solid steel guide bars and reinforced support lugs provide rigid support for the carriage.
Product Downloads
WP-100A Component Details
Review
- 加载中···
Please send your message to us
- *Name
- Phone
- *Title
- *Content

